Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NVIDIA GeForce RTX 50 Series "Blackwell" TDPs Leaked, All Powered by 16-Pin Connector
#1
NVIDIA GeForce RTX 50 Series "Blackwell" TDPs Leaked, All Powered by 16-Pin Connector

In the preparation season for NVIDIA's upcoming GeForce RTX 50 Series of GPUs, codenamed "Blackwell," one power supply manufacturer accidentally leaked the power configurations of all SKUs. Seasonic operates its power supply wattage calculator, allowing users to configure their systems online and get power supply recommendations. This means that the system often gets filled with CPU/GPU SKUs to accommodate the massive variety of components. This time we have the upcoming GeForce RTX 50 series, with RTX 5050 all the way up to the top RTX 5090 GPU. Starting with the GeForce RTX 5050, this SKU is expected to carry a 100 W TDP. Its bigger brother, the RTX 5060, bumps the TDP to 170 W, 55 W higher than the previous generation "Ada Lovelace" RTX 4060.

The GeForce RTX 5070, with a 220 W TDP, is in the middle of the stack, featuring a 20 W increase over the Ada generation. For higher-end SKUs, NVIDIA prepared the GeForce RTX 5080 and RTX 5090, with 350 W and 500 W TDP, respectively. This also represents a jump in TDP from Ada generation with an increase of 30 W for RTX 5080 and 50 W for RTX 5090. Interestingly, this time NVIDIA wants to unify the power connection system of the entire family with a 16-pin 12V-2x6 connector but with an updated PCIe 6.0 CEM specification. The increase in power requirements for the "Blackwell" generation across the SKUs is interesting, and we are eager to see if the performance gains are enough to balance efficiency.


https://www.techpowerup.com/324482/nvidi...-connector
  


Forum Jump:


Users browsing this thread:
3 Guest(s)