05-14-2024, 05:33 AM
(PR) Sabrent Announces USB-DS12 USB-C to SATA and IDE Adapter
The Sabrent USB-C to SATA/IDE 2.5"/3.5"/5.25" Drive Adapter (USB-DS12) is your one-stop storage management solution for SATA and IDE hard drives (HDDs), solid state drives (SSDs), and optical drives (CD/DVD-RW). It connects easily to Windows, macOS, and Linux systems, among other possible device hosts, via an integrated 5 Gbps (USB Gen 3.2 1x1) USB-C cable. The maximum speed of the connection depends on the drive's interface at speeds up to SATA 3 Gbps ("SATA-II" / SATA-300). The USB-DS12 adapter is plug and play with no drivers required and is hot-swappable for your convenience.
It's important to support devices both old and new. 3.5" and 5.25" drives require additional 12 V power to operate reliably, so we have included an external power supply. IDE drives may also require a 4-pin Molex style connector for power rather than an SATA power connector, so also included is an appropriate connector for maximum flexibility. The unit itself also has a power status LED to let you know when things are good to go. Plug everything in and get to retrieving or transferring your data, formatting or cloning your drive, or freely engage in other storage management operations. Read full story
https://www.techpowerup.com/322227/sabre...de-adapter
The Sabrent USB-C to SATA/IDE 2.5"/3.5"/5.25" Drive Adapter (USB-DS12) is your one-stop storage management solution for SATA and IDE hard drives (HDDs), solid state drives (SSDs), and optical drives (CD/DVD-RW). It connects easily to Windows, macOS, and Linux systems, among other possible device hosts, via an integrated 5 Gbps (USB Gen 3.2 1x1) USB-C cable. The maximum speed of the connection depends on the drive's interface at speeds up to SATA 3 Gbps ("SATA-II" / SATA-300). The USB-DS12 adapter is plug and play with no drivers required and is hot-swappable for your convenience.
It's important to support devices both old and new. 3.5" and 5.25" drives require additional 12 V power to operate reliably, so we have included an external power supply. IDE drives may also require a 4-pin Molex style connector for power rather than an SATA power connector, so also included is an appropriate connector for maximum flexibility. The unit itself also has a power status LED to let you know when things are good to go. Plug everything in and get to retrieving or transferring your data, formatting or cloning your drive, or freely engage in other storage management operations. Read full story
https://www.techpowerup.com/322227/sabre...de-adapter